silicone wristbands

Buy a number of is the wholesale price_rubber band bracelets

General size (adult): 8 "(L) x 1/2" (W) x 1/16"(H) or (202MM x 12MM x 2MM) Women"s size (adult): 7.5 "(L) x 1/2" (W) x 1/16"(H) or 190 MM x 12MM x 2MM) General size (children): 7 "(L) x 1/2" (W) x 1/16"(H) or (180MM x 12MM x 2MM) 61/2 "(L) x 1/2" (W) x 1/16"(H) or (165MM x 12MM x 2MM) The maximum screen printed and engraving area for adults is 7.677"X 0.334" Thrubber band braceletse maximum area of screen printing and engraving for children is 7.00"X 0.334" As for width, commonly used are: 1/4 "or 6MM 1/2 "or 12MM 3/5 "or 15MM 3/4 "or 19MM 1 "or 25MM             bracelet-silicone-personnalise-montrealembossed-wristbands

xcavated . Nowadays , silica gel materials can be seen everywhere in all walks of life . But there will still be some defects in silica gel material properties . One of the defects of the silicone hand ring is that it can not be restored to its original state after deformation . What is the reason why the silicone bracelet can not be restored after deformation ? One of the reasons for the deformation of silicone bracelets is that the materials used in the production . custom rubber wristbands made of high quality silica gel are not only not easy to deform , but also have good elasticity and are not easy to break . And high quality silicone wristband are healthy and environmentally friendly , and it will not cause harm to human body . The second reason for the distortion of the rubber bracelet is the incorrect way to store it . When we don"t wear silicone bracelets , we should store them properly instead of folding them . Otherwise , the bracelet will deform . The last reason for the distortion of the rubber bracelet is it takes too long or too short time to produce . It takes too long to produce and the product is easy to break . On the contrary , the silicone wristband are easily deformed .    

Silicone products can be divided into three categories according to the different molding process. Molded silicone products are usually made by being put into the high temperature mold after the addition of curing agent in the solid silica gel through the curing machine pressure and high temperature into a solid. The shape of the mold determines the shape of the molded silicone products. Molded silicone products is currently the most widely used in the silicone industry. So as for silicone bracelets. Extruded silicone products are usually extruded through the extrusion of silicone molding. The general shape of the extruded silirubber band braceletscone long and tubular which can be cut, but the shape of the extruded silicone has limitations. Liquid silicone products are made through the injection molding of silica gel. Because of its soft characteristic, widely used in the simulation of human organs.  

custom bracelets for her